LG 3200 TUTORIAL

Faceplate Installation - LG 3200


Getting Started:

 

This tutorial explains the installation of a transparent smoke faceplate on the LG 3200.

 

Don't have one? Buy one from The Phone Mall

 

You will need:

Small phillips screwdriver (star)

Small flathead screwdriver

 

 

 

 

 
Step 1
 
Here's all the material required.
Step 2

 

Use the flathead screw driver for carefully removing the 4 rubber plugs to expose the 4 screws

 
Step 3
 
Use the star screwdriver to remove the 4 screws
 
Step 4
 
 
Good job. They're removed. Don't lose them.
 
Step 5
 
 
There are 2 snapping points on either side that you will need to pry and pop out. There is also one at the very top of the faceplate.
 
Step 6
 
 
If you feel slight resistance when pulling apart the faceplate it is probably this piece pictured above. It has double sided tape on it. Keep pulling it wont break.
 
Step 7
 
 
Here's what you should have so far
Step 8
 

Get under the black circular sticker on the right side of the faceplate with a flathead screwdriver. Peel it off.
Step 9
 

Apply the sticker to the new faceplate.
Step 10
 

Likewise on the left side. Loosen it with the screwdriver.
Step 11

Peel it completely off with your fingers.
Step 12
 

..and apply it to the same place on the new faceplate.
Step 13
 

Next do the same for the sticker at the bottom of the faceplate.
Step 14
 

You should have all 3 pieces reapplied to the new faceplate now.
Step 15
 

Get ready to snap it on.. keep an eye on those screws.
Step 16
 

Firmly snap the new faceplate onto the phone ensuring the snapping points have clicked together.
Step 17
 

Presto! It's on. (..and looking good!)
Step 18
 

The battery cover.. don't forget to slide that one on.
Step 19
 

Here's the finished product. Congratulations!

 

 

Talk with other LG 3200 users here!

 

 
►►►►►► LG ACCESSORIES

WE GOT EM!  FACEPLATES, BATTERIES, FLASHING ACCESSORIES! STORE.THEPHONEMALL.NET

copyright 2004 The Phone Mall